PCMFlash Module #77 «Bosch ME9/MED9/EDC7/EDC16/PSG16/TCU Bootloader»

Full support for EDC7 ECU, including EDC7C1 and EDC7C3, as well as RE5RO5A, 6HP automatic transmission ECU of various modifications, A5SR1/A5SR2/A6GF1:

ME9/MED9/EDC7/EDC16/PSG16/TCU (MPC556/MPC562/MPC564) [RD/WR/CK]

ME9/MED9/EDC7/EDC16/PSG16/TCU MICRO (MPC556/MPC564) [RD/WR/CK]

ME9/MED9/EDC7/EDC16/PSG16/TCU EXT (MPC556/MPC562/MPC564) [RD/WR/CK]

ME9/MED9/EDC7/EDC16/PSG16/TCU EEPROM (MPC556/MPC562/MPC564) [RD/WR]

Improved support for EDC7 ECU, and added support for ME9.6 (E55) ECU

Reading, writing, checking and correction of the COP is supported.

Operation requires a direct connection to the ECU connector and a Scanmatik 2/Pro or "Powerbox for PCMflash" adapter and one of the tested adapters

There are conditionally two options:

1) Scanmatik 2 (with modified K-line) or Scanmatik 2 Pro (make sure you have the latest drivers installed), with Boot/Bench cable, etc. - similar to the 71st module.

2) Virtually any j2534 adapter with normal K-line support with a "Powerbox for PCMflash" (either "new" or "improved" for the 71st package). In this case, GPT signals are taken from the powerbox. The power is controlled automatically (switch in the AUTO position), and BOOT must be set to the MANUAL position. It is important. If the adapter has boot-pins (OP2, Chipsoft Lite/Mid/Pro, Scanmatik 2/Pro), then you can also set the AUTO position, but it's more convenient not to think about it. Checked everything from the list above, plus Dialink, Mongoose (various types).

One-time purchase required USB Key, without which the program does not work.

The key is not sold separately.

Downloads

• Key driver x64 x86- download
• Manual and software for primary key activation - download
• PCMflash program - download

Video instructions for installing the software and activating the module